top of page

LD-002R LCD Resin 3D Printer:

 

BUILD AND MOTION: Great emphasis is being placed on the LD-002R’s robust build quality and the components of its motion system, which is underpinned by a ball screw and single linear rail for the Z-axis.

ANTI-ALIASING: MSLA 3D printers use an LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out.

QUICK LEVELING: Quick leveling in the sense that the machine will lower the print plate to the vat for you, yes the LD-002R is quick leveling. Four hex screws feature on the print plate — loosen them before dropping the plate, and it will align to the level of the screen. Tighten and you’re good to go. Standard MSLA fare.

PERFORATED PRINT PLATE: Something of an oddity on a small desktop MSLA machine, the Creality LD-002R 3d printer has a perforated print plate. Typically seen on larger bottom-up machines where larger prints present additional pull that might dislodge an improperly adhered print, it’s unusual, and perhaps even distracting overkill, to see it on a smaller machine. It’s not a bad thing, but it makes you wonder why they did it.

AIR FILTER: A small box at the rear of the print chamber contains a pouch of activated carbon. This should help to remove part of the stench of exposed resin from the air.

Creality LD-002R LCD Resin 3D Printer

Артикул: V3D-Creality-LD002R
31 000,00₹ Обычная цена
29 800,00₹Спеццена
  • GENERAL SPECIFICATIONS

    • Technology: MSLA/LCD
    • Type: Resin
    • Year: 2019
    • Assembly: Fully-assembled
    • Manufacturer: Creality

    3D PRINTING SPECIFICATIONS

    • Build Volume: 120 x 65 x 165 mm
    • Layer Height: 20 – 50 microns
    • Resolution: 2560 x 1600 pixels
    • XY-axis positioning accuracy: 0.075 mm
    • Z-axis positioning accuracy: n/a
    • Printing Speed: 50 – 70 mm height/h
    • Bed-Leveling: Manual
    • Display: 3.5 in touchscreen
    • Third-Party Materials: Yes
    • Materials: 405 nm UV resin

    SOFTWARE REQUIREMENTS

    • Recommended Slicer: ChiTu Box
    • Operating system: Mac, Windows, Linux
    • File types: STL, CTB
    • Connectivity: USB

    DIMENSIONS AND WEIGHT

    • Frame dimensions: 221 x 221 x 403 mm
    • Weight: 7 kg
Product Page: Stores_Product_Widget
bottom of page